Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revisionLast revisionBoth sides next revision |
| usp:default_map [2012/08/26 19:22] – [Default memory map] admin | usp:default_map [2012/12/17 21:14] – [Default memory map] admin |
|---|
| | 0x0113 | | REG_RS3_SPEED | GSR | Yes | Communication speed of the third RS232 interface. Value in Bd. Default 38400| | | 0x0113 | | REG_RS3_SPEED | GSR | Yes | Communication speed of the third RS232 interface. Value in Bd. Default 38400| |
| | 0x0114 | | REG_RS4_SPEED | GSR | Yes | Communication speed of the fourth RS232 interface. Value in Bd. Default 38400| | | 0x0114 | | REG_RS4_SPEED | GSR | Yes | Communication speed of the fourth RS232 interface. Value in Bd. Default 38400| |
| | 0x0115 | | REG_ETH_UTILITY | GSR | Yes | Ethernet utility register, see description | | | 0x0115 | | REG_ETH_UTILITY | GSR | Yes | Ethernet utility register, [[usp:default_map&#reg_eth_utility_register|see description]] | |
| | 0x0116 | IP3,IP2 | IP1,IP0 | GSB | Yes | Module embedded Ethernet IP address | | | 0x0116 | IP3,IP2 | IP1,IP0 | GSB | Yes | Module embedded Ethernet IP address | |
| | 0x0117 | M3,M2 | M1,M0 | GSB | Yes | Module embedded Ethernet Mask | | | 0x0117 | M3,M2 | M1,M0 | GSB | Yes | Module embedded Ethernet Mask | |
| |
| ^ Bit ^ Description ^ | ^ Bit ^ Description ^ |
| ^ 0 |LED On/Off bit 1 = LED on 0 = LED off | | | 0 | LED On/Off bit 1 = LED on 0 = LED off | |
| | |
| | |
| | ==== REG_ETH_UTILITY Register ==== |
| | |
| | ^ Bit ^ Description ^ |
| | | 0 | DHCPEN, 1= DHCP is enabled, 0=DHCP disabled | |
| |
| ==== REG_COMMAND Register ==== | ==== REG_COMMAND Register ==== |
| |
| Application speciffic, writing to this register will execute a command. | Application speciffic, writing to this register will execute a command. |
