Differences

This shows you the differences between two versions of the page.

--- usp:default_map [2012/08/05 18:24] – [Default memory map] admin
+++ usp:default_map [2012/12/17 21:13] – [REG_UTILITY Register] admin
@@ Line 18: / Line 18: @@
 |  0x0011 - 0x00FF |   |  APP  |  GSR  |  No  | Application speciffic  |
 |  0x0100  |  SERIAL_NUMBER  ||  GSB  |  Yes  | Device serial number, uint32  |
-|  0x0101 - 0x0105  |  PARTNUM[0]-[19]  ||  GSB  |  Yes  | 19 bytes, ASCII Alphanumeric device part number, char[19]  |
+|  0x0101 - 0x0105  |  PARTNUM[0]-[19]  ||  GSB  |  Yes  | 20 bytes, ASCII Alphanumeric device part number, char[20], LSB at byte 0 of 0x0101  |
-|  0x0106 - 0x0109  |  ANAME[0]-[19]  ||  GSB  |  Yes  | 19 bytes, ASCII Alphanumeric device name/description, char[19]  |
+|  0x0106 - 0x010A  |  ANAME[0]-[19]  ||  GSB  |  Yes  | 20 bytes, ASCII Alphanumeric device name/description, char[20]  |
-|  0x010A  |   |  REG_UTILITY  |  GSR  |	 Yes  | Utility register, see description		|
 |  0x010B  |   |  REG_COMMAND  |  GSR  |	 Yes  | Command register, see description		|
-|  0x010C - 0x010F  |    |    |    |	 Yes  | Application speciffic		|
+|  0x010C  |   |  REG_UTILITY  |  GSR  |	 Yes  | Utility register, see description		|
+|  0x010D - 0x010F  |    |    |    |	 Yes  | Application speciffic		|
 |  0x0110  |   |  REG_MODID  |	GSR  |  Yes  | Module ID = USP module address	|
 |  0x0111  |   |  REG_RS1_SPEED  |  GSR  |  Yes  | Communication speed of the first RS232 interface. Value in Bd. Default 38400|
@@ Line 72: / Line 72: @@
 ^  Bit  ^  Description  ^
-^  0  |LED On/Off bit  1 = LED on   0 = LED off |
+|  0  | LED On/Off bit  1 = LED on   0 = LED off |
+==== REG_ETH_UTILITY Register ====
+^  Bit  ^  Description  ^
+|  0  | DHCPEN, 1= DHCP is enabled, 0=DHCP disabled |
 ==== REG_COMMAND Register ====
 Application speciffic, writing to this register will execute a command.