Both sides previous revisionPrevious revisionNext revision | Previous revisionLast revisionBoth sides next revision |
usp:default_map [2012/08/05 18:24] – [Default memory map] admin | usp:default_map [2012/12/17 21:14] – [Default memory map] admin |
---|
| 0x0011 - 0x00FF | | APP | GSR | No | Application speciffic | | | 0x0011 - 0x00FF | | APP | GSR | No | Application speciffic | |
| 0x0100 | SERIAL_NUMBER || GSB | Yes | Device serial number, uint32 | | | 0x0100 | SERIAL_NUMBER || GSB | Yes | Device serial number, uint32 | |
| 0x0101 - 0x0105 | PARTNUM[0]-[19] || GSB | Yes | 19 bytes, ASCII Alphanumeric device part number, char[19] | | | 0x0101 - 0x0105 | PARTNUM[0]-[19] || GSB | Yes | 20 bytes, ASCII Alphanumeric device part number, char[20], LSB at byte 0 of 0x0101 | |
| 0x0106 - 0x0109 | ANAME[0]-[19] || GSB | Yes | 19 bytes, ASCII Alphanumeric device name/description, char[19] | | | 0x0106 - 0x010A | ANAME[0]-[19] || GSB | Yes | 20 bytes, ASCII Alphanumeric device name/description, char[20] | |
| 0x010A | | REG_UTILITY | GSR | Yes | Utility register, see description | | |
| 0x010B | | REG_COMMAND | GSR | Yes | Command register, see description | | | 0x010B | | REG_COMMAND | GSR | Yes | Command register, see description | |
| 0x010C - 0x010F | | | | Yes | Application speciffic | | | 0x010C | | REG_UTILITY | GSR | Yes | Utility register, see description | |
| | 0x010D - 0x010F | | | | Yes | Application speciffic | |
| 0x0110 | | REG_MODID | GSR | Yes | Module ID = USP module address | | | 0x0110 | | REG_MODID | GSR | Yes | Module ID = USP module address | |
| 0x0111 | | REG_RS1_SPEED | GSR | Yes | Communication speed of the first RS232 interface. Value in Bd. Default 38400| | | 0x0111 | | REG_RS1_SPEED | GSR | Yes | Communication speed of the first RS232 interface. Value in Bd. Default 38400| |
| 0x0113 | | REG_RS3_SPEED | GSR | Yes | Communication speed of the third RS232 interface. Value in Bd. Default 38400| | | 0x0113 | | REG_RS3_SPEED | GSR | Yes | Communication speed of the third RS232 interface. Value in Bd. Default 38400| |
| 0x0114 | | REG_RS4_SPEED | GSR | Yes | Communication speed of the fourth RS232 interface. Value in Bd. Default 38400| | | 0x0114 | | REG_RS4_SPEED | GSR | Yes | Communication speed of the fourth RS232 interface. Value in Bd. Default 38400| |
| 0x0115 | | REG_ETH_UTILITY | GSR | Yes | Ethernet utility register, see description | | | 0x0115 | | REG_ETH_UTILITY | GSR | Yes | Ethernet utility register, [[usp:default_map&#reg_eth_utility_register|see description]] | |
| 0x0116 | IP3,IP2 | IP1,IP0 | GSB | Yes | Module embedded Ethernet IP address | | | 0x0116 | IP3,IP2 | IP1,IP0 | GSB | Yes | Module embedded Ethernet IP address | |
| 0x0117 | M3,M2 | M1,M0 | GSB | Yes | Module embedded Ethernet Mask | | | 0x0117 | M3,M2 | M1,M0 | GSB | Yes | Module embedded Ethernet Mask | |
| |
^ Bit ^ Description ^ | ^ Bit ^ Description ^ |
^ 0 |LED On/Off bit 1 = LED on 0 = LED off | | | 0 | LED On/Off bit 1 = LED on 0 = LED off | |
| |
| |
| ==== REG_ETH_UTILITY Register ==== |
| |
| ^ Bit ^ Description ^ |
| | 0 | DHCPEN, 1= DHCP is enabled, 0=DHCP disabled | |
| |
==== REG_COMMAND Register ==== | ==== REG_COMMAND Register ==== |
| |
Application speciffic, writing to this register will execute a command. | Application speciffic, writing to this register will execute a command. |